- Zebra print driver for mac install#
- Zebra print driver for mac windows 10#
- Zebra print driver for mac software#
- Zebra print driver for mac windows 8.1#
- Zebra print driver for mac code#
***IMPORTANT NOTE: To switch from Receipt printing to Label printing or vice versa using the same printer, you must reset the Printer's Factory default settings by following the steps below, EVERY TIME you switch. *NOTE: If the top is printing too close to the edge, make the following change:Ĭhange the Adjustment - Top to 0.05 inch (this is a positive value) Once complete, be sure to right click on the Printer again and choose Printer Properties - choose to Print a Test Page. Go back to the Printing Preferences - Advanced Setup.Ĭhange the Adjustment - Left Position (-.05) Be sure to use a negative sign.Īfter making these changes, Click OK. *NOTE: If the label is off center (left/right) make the following change:
Use the following settings for printing Labels: If still off center, make further changes and tests to the unprintable area settings until it centers. Under the Unprintable Area, change Left: to 0.25.Īfter the test is complete, go back into Design Manager and print another receipt.
Go back to the Printing Preferences - Options tab. *NOTE: If the receipt is printing off center (left/right) make the following change: Print a test POS Invoice receipt in Design Manager. Set Paper Size to Width 4.00 x Height 4.00īe sure that the rotate180 degrees box is checked as well
Zebra print driver for mac code#
Important: Always print a couple of Design Manager test labels and then test them using the Bar Code Scanner before printing a large run of labels. If the computer that is used to print the labels is also used for other printing then make sure that the correct printer is selected the next time you print a non-label document.ĥ. *Some versions of Windows do not have a default paper size and therefore the Setup button will need to be used every time labels are printed.
These settings can be changed in the Start menu of your Windows operating system by selecting Printers and Devices. Printer Configuration: Please see below for the proper settings needed to print Receipts or Labels. The Use Receipt Printer box must be checked if you are printing receipts to the Zebra printer.Ĥ. Go to G/L - Company Information window -A/R/Showroom tab.
Zebra print driver for mac software#
The following setting must be changed in the Design Manager software if you are printing receipts using the Zebra printer. The Use Label Printer box must be checked if you are printing labels to the Zebra printer.ģ. Go to G/L - Company Information window - Inventory tab. The following setting must be changed in the Design Manager software if you are printing labels using the Zebra printer. In the Drop down for Driver find the GC420d (without the EPL)Ģ. Right click on the printer and choose Printer Properties. Go to the printer on your Computer - Devices/Printers. If this driver is the GC420d (EPL) driver, you MUST change this driver to the GC420d driver (name should not include EPL).
Zebra print driver for mac install#
Upon plugging the Zebra printer in, the computer may prompt you to download and install its own driver. **NOTE - If you are using the Zebra LP2844 or LP2824 printer, please see the following article here.ġ. *NOTE - This printer does not install on Mac computers.
Zebra print driver for mac windows 10#
OPERATING SYSTEM: Windows 7 (32 and 64 bit), Windows 10 (32 and 64 bit), Windows Server 2016, Windows Server 2012, Windows 8.Setup and Installation for the Zebra Receipt/Label Printer Model # GC420d Recommended driver installation and configuration utility (v1.).
Zebra print driver for mac windows 8.1#
OPERATING SYSTEM: Windows 10, Windows 7, Windows 8.1 See the release notes for printer compatibility and system requirements. Use this driver to develop applications that are compatible with the Unified POS specification.
0 kommentar(er)
